Standard GM 5-Position Tilt Steering Column, 30 Inch Long, Chrome

Description

2-inch column with 5 position tilt provides easy entry/exit and custom driving position, Built-in self-cancelling GM turn signal switch with on-column activated hazard flashers, GM 3-7/8-inch column wiring plug is compatible with OE and aftermarket chassis harnesses, Floor shift style column works with any floor shifted automatic or manual transmission, 30-inch-long bright chrome plated column uses ’69-’94 GM specs and fits a wide variety of applications
Standard GM 5-Position Tilt Steering Column, 30 Inch Long, Chrome
Sku # 91032972
Mfr. Part # 91032972
Condition
New
Brand
Speedway Motors
Sold
Each
Details
Notes
How to Measure Required Steering Column Length in Three Easy Steps
Your steering column length will not always be identical to the factory column due to several factors, including seating position, steering linkage connection (converting from a gear box to a rack-and-pinion for example), and other factors. For that very reason we highly recommend you measure your specific application for the best fitment.
Start with your dash/gauge cluster installed and your seating position confirmed so that you can determine proper steering wheel placement. Consider having your steering wheel of choice in hand as well for even more accurate measuring.
Step 1:
All our columns feature a 7-inch bell, which is the top portion where the tilt mechanism and turn signal switch reside. So, you will need to confirm you have a minimum clearance of seven inches between your dash and steering wheel.
Step 2:
Measure from the back face of your steering wheel (taking into consideration any steering wheel adapter thickness) to your firewall.
Step 3:
Add 3-inches to this value for proper column pass through distance into the engine bay to get your column length total and then round up or down to the nearest column length we offer (30-, 32-, or 33-inch length) depending upon personal preference.
Additional Notes for Floor Shift Applications:
Verify column length needed to prevent the steering wheel hitting the dash when you tilt the wheel up
Main column ground is attached to the column tube and needs to be secured to chassis ground
The black wire in the ribbon harness is the ground for the horn relay
Replacement Parts
A replacement turn signal switch assembly is available for this column.
Info
2-inch OD column housing, accepts any 2-inch column mount or drop
Overall length from end of bell to tip of steering shaft is 30-inches
Five position tilt mechanism with 30 degrees of total adjustment
Integrated GM style self-canceling turn signal switch with 4-way hazards
GM style 10-pin 3-7/8-inch wiring plug connects directly to most GM and aftermarket wiring harnesses
Aftermarket true 1-inch DD output shaft uses commonly available aftermarket U-joints or rag joints
Accepts any 1969 to 1994 GM steering wheel or GM steering wheel adapter
Rich chrome plated housing compliments any interior
Includes chrome plated turn signal lever, tilt lever, and hazard knob
GM style universal column will fit most any application when used with vehicle specific or universal mounting brackets
Enjoy the Drive Once Again
In the muscle car heyday, a tilt steering wheel was a scarce reality saved for luxury cars and exotics. If you did not fit well between the steering wheel and the seat tough cookies! It does not have to be that way today for your muscle car or street rod. Get behind the wheel and drive again in comfort with a Speedway Motors Universal GM Tilt Steering Column.
Do not let our product name scare you either! The "GM"is referring to the electrical connection type and steering shaft spline for the steering wheel. This column can just as easily fit into a Dodge, Ford, or any other project you may be building with just a little effort adapting the wiring to your vehicle and picking up aGM-specific steering wheel adapterfor your aftermarket steering wheel of choice.
A Premium Tilt Column with All the Features You Want
Old tilt columns are just that-old! Do not waste your time in a salvage yard digging around for a steering column for your project that will undoubtably need a complete rebuild. Not to mention it most likely will be too long or too short for your application.
Using one of our universal tilt steering columns is the way to go. This is not just any old aftermarket steering column either. Manufactured with all new parts in a compact design, they will literally fit most anywhere. The small 2-inch diameter steering column tube and compact tilt head that is just 7-inches in length provides copious amounts of leg room while fitting nicely within most any dash.
The five-position tilt head allows 30 degrees of tilt, 20 degrees up and 10 degrees down from straight. This tilt function not only provides the perfect angle for personal driving comfort but can facilitate easier ingress/egress with a simple flick of the tilt lever. We also offer this column in a column shift version.
Details That Are an Industry Standard
We all have our favorite makes and models, but when it comes to tilt steering columns the 1969-1994 GM version takes top billing. These columns have been used as salvage yard retrofits for decades due to their wide fitment range, ease of availability, and huge aftermarket support for service replacement parts like turn signal switches, bearings, and more. So, when it was time for us to build our own universal tilt columns of course we kept ours true to these popular GM models.
Our tilt steering columnsfollow these 1969-1994 GM specifications for steering wheel spline, turn signal wiring, and more (making them a near-drop-in replacement for these years). We do upgrade the GM double-D (DD) steering shaft output from the OE .985 inches to a true 1-inch DD dimension for better compatibility with aftermarketU-joints and steering shaft componentsfor connecting to your steering box or steering rack.
Installs Easily in Almost Anything with Four Wheels
Our Universal GM Tilt Steering Column arrives in a beautiful chrome plated finish ready to make your interior color scheme pop and ships with cleanly styled chrome-plated control levers for the turn signal switch, tilt mechanism, shifter, and hazard light switch. If you prefer, we offer our column in a plain steel version as well. The 2-inch OD column tube allows it to be easily secured to your dash using the original mount or a universal column mount. We offerupper and lower column mounts, column drops, and firewall supportsto aid in your installation.
The standard GM steering wheel spline means any 1969-1994 GM steering wheel is a direct fit, or you can purchase asteering wheel adapterto aid in fitting your 3-, 5-, or 9-bolt wheel to your new column. Our steering wheel adapterbuyer's guidewill help you find the proper fit.
Our Universal Tilt Steering Column uses GM steering column wiring connectors. The standard 3-7/8-inch turn signal switch connector even uses stock GM wire color codes. This makes our column a direct plug-and-play electrical connection to millions of GM vehicles or just about any vehicle that has been upgraded with anaftermarket wiring harness. For non-GM vehicles with factory wiring, you can easily adapt your turn signal wiring by crimping on a newharness connectorto match the OE Chevy steering column wiring connector.
If a fixed steering column is preventing you from enjoying your ride, then upgrade to our Universal GM Tilt Steering Column today and drive your vehicle in comfort. Your knees will thank you for it!
Specs
Black-ground for horn
Gray-Left front turn
Blue-right front turn
Brown-power feed from hazard flasher
Purple-power feed from turn flasher
Yellow-Left rear turn
Green-Right rear turn
White-Power feed from brake light switch
Features
As featured on Classic Truck’s Week to Wicked. Watch the transformation here!
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
Specs
Material Type
Steel
Sold in Quantity
Each
Finish
Chrome
Output Shaft Type
1" DD
Shifter Location
Floor
Key Location
Dash
Mount Type
Universal
Collapsible
No
Overall Length
30
Tube O.D.
2
MFG. Part #
91032972
Column Type
Tilt
Notes
7" from steering wheel mounting point to 2" tube. Wires exit 8.375" below bell shaped housing.
Reviews
Universal tilt column
Rated
by Randy on March 06, 2021
Summary:
Replaced column in 1954 Chevy street machine. New column Turn signal switch had broken piece in it that did not allow the self cancel feature to work. Speedway sent new replacement switch which was a better quality item. Had to pull column to install new harness and switch. Had a lot of problems pulling new wiring harness through the column even though we followed the instructions on the Flaming River video "How To". Had to add a 1/4 in. spacer under the cancel cam. Works like it is supposed to now. Probably would have been easier to just return entire column and exchange for replacement column.
Yes, I recommend this product.
Without a doubt!! Beautiful column!!
Rated
by Rooster on February 11, 2021
Summary:
Looks awesome in my 33 Chevy 5 window!
Yes, I recommend this product.
nice piece, typical of me I did a couple of minor mods
Rated
by Maverick Tim on January 14, 2021
Summary:
had to do a couple of mods, nothing major but no part can fit and function in every situation. I moved the wiring harness up toward the steering wheel to get it more hidden from view. I also had to do a minor mod on the lower tube to get sufficient clearance to the cylinder head. It is pretty much hidden, again not your fault but I made it work
I WOULD BUY THIS AGAIN
Rated
by ARKY on August 30, 2020
Summary:
WORKS GREAT
Yes, I recommend this product.
would buy again
Rated
by trex on July 13, 2020
Summary:
put it in my 55 gasser work great
Yes, I recommend this product.
Related Items / Suggested Parts
Ididit 2401800010 Adjustable Steering Column Floor Mount, 2 Inch
Standard GM 5-Position Tilt Steering Column, 30 Inch Long, Plain
Standard GM 5-Position Tilt Steering Column, 30In, Column Shift, Plain
Standard GM 5-Position Tilt Steering Column, 30 In, Column Shift
Sweet Mfg U-Joint, 1 In DD to 3/4 DD, IDIDIT/Flaming River Column
Tilt Column Installation Kit, GM Applications 69-94
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.