Speedway Mustang II Tubular Upper Control Arms, Stock Width, Pair

Description

These tubular control arms are bolt on replacements for 74-78 Mustang II and 74-80 Pinto and Bobcat making them perfect for hot rods with a Mustang II front suspension, Heavy duty 1" OD .120" wall thickness steel tubing provides a strength that stock stamped arms can't match, Works on stock or aftermarket crossmembers such as Speedway or Heidt's crossmembers, Screw in ball joint is a direct bolt in fit to stock or aftermarket Mustang II spindles, Upgrade your hot rod with these clean and sleek looking control arms for a true custom built appearance
Speedway Mustang II Tubular Upper Control Arms, Stock Width, Pair
Sku # 91035320
Mfr. Part # 91035320
Condition
New
Brand
Speedway Motors
Sold
Pair
Details
Notes
Why go with tubular control arms? The most obvious reason is the looks. Tubular control arms and strut rods give your hot rod a much cleaner and hi-tech appearance than the stock type
do
. Another bonus is that the tubular control arms are available in 5/8" narrower than stock, which helps tuck the wheels up under the fenders without having to buy expensive special offset wheel. When using 5/8" narrower control arms, 1" must be removed from each inner tie rod end.
Info
You don't have to look any farther for tubular control arms for your hot rod. Full .120 wall, 1" diameter tubing, fixture welded and features screw-in ball joints and no-squeak bushings. Will work with nearly any stock or aftermarket crossmember.
Replaces 1974-80 Pinto, Bobcat and 1974-78 Mustang II control arms.
Full .120" wall
1" diameter tubing, 0.75" diameter cross shaft
Fixture welded
Stock Width
Screw-in ball joints
No-squeak bushings
Works with all Mustang II crossmembers we sell
Sold as a pair
Charts
(PDF)
Tubular Control Arm Chart (GIF)
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
Specs
Material Type
Steel
Sold in Quantity
Pair
Finish
Natural
Bushing Material
Rubber
Hardware Included
No
Overall Width
12.00
Tube O.D.
1.00
Control Arm Style
Tubular
Bushing Included
Yes
Position
Upper
Cross Pin Material
Steel
Mount Center to Ball Joint Center
8.25"
Mounting Bolt Center to Center
5
MFG. Part #
91035320
Taper
7
Reviews
I will buy from Speedway again
Rated
by Dave on May 19, 2021
Summary:
Good quality parts.
Yes, I recommend this product.
40 Ford upper control arms
Rated
by Hotrod on February 22, 2021
Summary:
Quality is very good in welds and tubing.
Great product @ a fair price.
Rated
by Dick 51 Chevy on January 29, 2021
Summary:
I bought a no name mustang ll ifs kit. It came with the wrong upper control arms. Speedway parts solved my problem.
Yes, I recommend this product.
No
Rated
by Nad on January 27, 2021
Summary:
Price is ok, but welds are mig not tig welded.
No, I would not recommend this product.
excellent product
Rated
by Roy on January 27, 2021
Summary:
Were back ordered a few days. Last part to complete Mustang II suspension. Beautiful assembly!
Yes, I recommend this product.
Related Items / Suggested Parts
Speedway Mustang II Upper Control Arm T-Bolts
Speedway Mustang II Tubular Upper Control Arm, Stock Width
Heidts CA-101 Mustang II Upper Tubular Control Arms, Stock Width
Speedway 1968-89 Chrysler-Type Upper K772 Style Ball Joint
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.