Authentic Capo Spikes - Banjo 5th String Capo - PREMIUM / LONG 11.7mm - sq.shaft

Description

This offering is for ten (10) PREMIUM / LONG 11.7mm Authentic Brand Capo Spikes for stringed instruments in new condition. These are not just bent nails. They are machined-steel spikes with a formed, oval head, long point and a square, serrated shaft making them ideal for use on stringed instruments like a Banjo as a 5th String Capo. These are longer than the regular PREMIUM Authentic Spikes and also have a more dimensionally square shaft and treads to prevent the spike from spinning when properly installed in a tap hole. The top of the domed head is smooth, rounded. The shaft is square, sharp and has machined treads down the sides of the shaft for a lasting, sure grip. They measure:  11.7mm (29/64”) long;  .8mm (.03” - 1/32”) square shaft;  1mm x 1.5mm ( 5/128” x 1/16”) oval head;  .7mm (3/128”) head overhang. A tap drill of .028” (#70) is recommended for installation.
–––––––––––––––––––––  S H I P S   F R E E  –––––––––––––––––––
INSTALLATION:  There are no instructions included with the order. Installation is fairly straightforward— drill a tap hole and tap in the spike. Though, you’re working with something very tiny on a precious fret board and all stringed instruments are not alike. It’s all about the tap hole. The neck composition will determine the difficulty level. A pin-prick followed by a tap hole should be made in the neck where you want a string capo'd, maybe at a very slight angle. A drill bit size of .028” / #70 is recommended. Put a mark on the drill bit with a marker to the desired depth. Drill the hole then gently tapped the spike in to the proper depth to hold the string down. If all you can find is a 1/32” drill bit for a tap hole
it may help to put some glue on the shaft for a solid grab. It's also recommended that the neck is held solidly while you do this and a small hand crank drill be used. Be careful if you use a Dremel type drill
. It can do some quick damage. Be sure the head is pointed in the right direction before you tap it in. The shaft, being very square, wont turn once it’s installed. Good Luck !
I prefer to ship as a First Class Letter without tracking via United States Postal Service (USPS) unless otherwise requested or notified. Your item(s) will be well packed and guaranteed "as described" when shipped. Any questions regarding this item will be answered promptly--- ASK BEFORE YOU BID ! EMAIL ME IF YOU HAVE ANY QUESTIONS about shipping, the total amount or payment options before you check-out. To be sure-- request an invoice if you don't immediately receive one. PROMPT PAYMENT IS EXPECTED via PayPal only.
----------------------------------------------------------
International Buyers Please Note:
I do not participate in ebay's third-party Global Shipping Program. Your item is sent by me directly to a confirmed address you provide (usually your confirmed PayPal shipping address). Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up. Do not confuse them for additional shipping charges. I do not mark merchandise values below a realistic value or mark items as "gifts" - US and International government regulations prohibit such behavior.
----------------------------------------------------------